Sharp FX-J80U Manual De Operación página 17

CARE AND MAINTENANCE 3
PLASMACLUSTER ION GENERATING UNIT
( electrode section )
MAINTENANCE
1. Remove the unit cover,
and pull out the unit
holder.
NOTE
• Do not clean with anything other than the unit cleaning brush. Doing so could lead to failures in the unit.
• A bent electrode could be cut off and dropped during the cleaning process, but it will not change the performance.
• Do not touch the electrode directly. Doing so could lead to pain/itching.
• Do not transform the electrode section. Doing so can damage it.
• Do not touch the connection terminals. Doing so can damage them.
UNIT REPLACEMENT INDICATOR
When the total operation time exceeds 17,500 hours, the unit replacement indicator will flash to indicate that the
Plasmacluster ion generating unit needs replacement.
Operating time
17,500 hours
Replace the Plasmacluster ion generating unit
Flash slowly
19,000 hours
Stop the emission of the Plasmacluster ions.
Flash quickly
* The replacement time is not related to the selected operation mode.
REPLACEMENT
Consult your dealer when purchasing a replacement Plasmacluster ion generating unit.
Model: IZ-C90MU
②
Disposal of Plasmacluster Ion Generating Unit
Dispose of used Plasmacluster ion generating unit according to local laws and regulations.
materials: Polybutylene terephthalate, electronic parts
2. Remove dusts from the
electrode section.
Before cleaning
Electrode Around the base
①
Remove the claw of unit holder (
and remove the Plasmacluster ion
generating unit ( ).
2
EN-15
3. Insert the unit holder
Unit cleaning brush
After
cleaning
),
1
in the main unit, and
install the unit cover.
②
①