Sharp FX-J80U Manual De Operación página 23

OTHER SETTINGS 4
HOW TO CHANGE VARIOUS SETTINGS 3
Display Wi-Fi network
status
1. Select by following Steps 1 - 4
on page 19.
2. After displaying
network status of Wi-Fi adapter will
be displayed.
Connection is stable
Wi-Fi adapter is off
Please turn on Wi-Fi adapter.
Router is not registered
Please perform the Wi-Fi connection with
the router.
Link settings with the App is not performed
Please perform the link setting with the
smartphone.
Wi-Fi adapter network error
Please turn off Wi-Fi adapter and turn on
again after a while.
Network error between the air purifier and
the router
Please confirm the network status of the
router.
Network service error
Please turn off the air purifier and confirm
the internet status, then try again.
3. Complete
SPECIFICATIONS
Wireless LAN: IEEE802.11b/g/n
Frequency range: 2.4GHz frequency band
for a while,
♪
EN-21
AP (Access Point) mode
1. Select by following Steps 1 - 4
on page 19.
2. Perform Wi-Fi connection of the air
purifier and the router based on the
App screen.
Refer to the App or the Wi-Fi Connect
Guide for further operations.
and blinks while setting the
connection between the product and the router.
Once connected, receiver level will be displayed.
weak
A connection error is occuring if
Please confirm the router and try again.
Light up
strong
is displayed.