OTHER SETTINGS 2
HOW TO CHANGE VARIOUS SETTINGS 1
You can change the functions in the table below.
Follow Steps 1 - 4 to select the Function.
Step 1. Turn the
product OFF.
Step 2.
♪
Press for
3 sec.
Step 3. Select
.
♪
Step 4. Select "Function Number".
GO BACK
♪
or
No
Function
Wi-Fi adapter ON/OFF
Wi-Fi connection with a router
Link settings with a smartphone
Initialization of Wi-Fi function
Update
Confirmation of MAC address
Display Wi-Fi network status
AP(Access Point) mode
Step 5. Please refer to page 19 - 21
for the detail of each functions.
Set
Step 6. Finish the setting.
♪
~
♪ ♪ ♪ ♪ ♪
♪
Set
GO FORWARD
♪
・・・・
Page
19
19
20
20
20
20
21
21
♪
Turn off
EN-19
Wi-Fi adapter ON/OFF
1. Select
by following Steps 1 - 4.
2. Select "Setting Number".
OFF: Stoppage of Wi-Fi function
ON: Start the Wi-Fi function
3. Complete
• When
is selected, the square rotates
on the display until the setting is completed.
When setting is completed,
Wi-Fi connection with a
router
1. Select
by following Steps 1 - 4.
2. After
is displayed, press the
Wi-Fi Protected Setup (WPS) button
of the router.
Blink
Blink
Once connected, receiver level will be displayed.
weak
A connection error is occuring if
Please confirm the router and try again.
3. Complete
♪
♪
is displayed.
Light up
strong
is displayed.
♪