Other Settings 1; Caution For Use - Sharp FX-J80U Manual De Operación

OTHER SETTINGS 1

Please refer to the Wi-Fi Connect Guide
for how to connect and pair your smart
device to your product.
SAFETY / PRECAUTIONS
WARNING
In case of remote operation from outside, you
may not be able to check air purifier current
condition or the area around it and the situation
concerning anyone possibly staying there, so
please adequately confirm safety before use.
• Make sure the electric plug is fully inserted into a
power socket, and there is no dust on the plug or in
the socket hole. (It may cause heat, combustion,
fire, etc., due to poor contact or contact failure)
• Make sure beforehand that although there are
some wind changes, no negative impact will occur
to the environment inside the room. (such as..
whether there is anything flying easily in the wind)
Because the wind may cause something to fall
down, resulting in fires, wounds, defacement of
household belongings.

CAUTION FOR USE

• Agreement with "Terms of Service" is needed to
use App.
• App will be periodically revised because of version
upgrade.
• Screens and illustrations in this book are for
explanation, there are some differences to the real
product.
• In case of bad connection, it is expected that
smartphone is unavailable to control or the
operation is not reflected to the smartphone.
• Locking smartphone display is recommended to
avoid wrong operation.
• Although the App is free, communications expenses
for download of dedicated App and operation with
smartphone or tablet are customer's obligation.
CAUTION FOR Wi-Fi
Caution for usage about electrical wave
• In case of the usage at the following place, the
operation cannot be guaranteed : Near Bluetooth
wireless communications device using the same
frequency (2.4GHz) as this product or specified
low power wireless device. Also in the place like
magnetic field of the device such as microwave
oven, or the place with static electricity or the
place radio disturbance is occurred, it may not be
available temporarily due to weak electrical wave.
• Wireless connection and performance cannot be
guaranteed for all routers or housing environment.
At the following places, it is likely electrical wave
cannot reach or is disconnected: Inside of the
building made with concrete, reinforcing steel or
metal / near the obstruction / near the wireless
communications device applying the same
frequency.
• Wi-Fi of this product corresponds to channel
1 - 13. It's not available to communicate with the
routers set up to other channels.
Caution for personal information
(related to Security)
• Using Wi-Fi device has the possibility of
interception as long as using electrical wave
regardless of secret code setting.
• Wi-Fi has the advantage of free LAN connection
in the service area because of the communication
between this product and the router applying
electrical wave. On the other side, intercept of
communication or unfair intrusion are likely to occur
because electrical wave reaches everywhere in the
certain area through the obstructions (e.g. walls).
• Do not connect to the device or network without
App to authority.
• The Wi-Fi function of this product should be
initialized in case of disposal or handover to a third
person.
• The Wi-Fi function of the unit should be initialized
in case of handover from a third person to avoid
illegal access of outsider.
How to set Wi-Fi ON / OFF after
completing the initial settings
When turning off Wi-Fi
♪
～
Press for 3 sec.
When turning on Wi-Fi again
Refer to Page 4 - 7 of the air purifier Wi-Fi
Connect Guide and set up the connection with the
router again.
• If the product is already registered to your smartphone,
®
you do not need to register again.
NOTE
• Wi-Fi ON / OFF can also be set from
" : Wi-Fi adapter ON/OFF". (Page 19)
In this case, Wi-Fi connection with the router will
be automatically restored.
• Reconnection to the Wireless Router may take a
few minutes to complete, after turning Wi-Fi on
again.
EN-18
Go off