Polarizing Set (Optional) - Optika Italy B-150D Serie Manual De Instrucciones

7.4

Polarizing set (optional)

1. Place the polarizer on the light exit ① at the base
of the microscope. (Fig. 4)
2. Loosen the head fixing knob ② and remove the
head from the microscope frame. (Fig. 5)
3. Insert the analyser into the hole inside the frame
③. (Fig. 6)
4. Put back the head into its original position and
lock the fixing knob.
③
Page 9
①
F ig. 4 F ig. 4
②
F ig. 5 F ig. 5
F ig. 6 F ig. 6