Polarizing Set (Optional) - Optika Italy B-290 Serie Manual De Instrucciones

7.5

Polarizing set (optional)

1. Place the polarizer on the light exit ① at the base
of the microscope. (Fig. 16)
2. Loosen the head fixing knob ② and remove the
head from the microscope frame. (Fig. 17)
3. Insert the analyser into the hole inside the frame
③. (Fig. 18)
4. Put back the head into its original position and
lock the fixing knob.
Page 14
①
F ig. 16 F ig. 16
②
F ig. 17 F ig. 17
③
F ig. 18 F ig. 18