SHERCO SE 4.5i-f Manual De Propietario página 65

HPERC function
Operating Time (hours)
This function makes it possible to visuali-
ze the operating hours of the vehicle. It is
not possible in normal time to modify this
value or to give to zero this information.
The representable largest value is 9.999
Fig9 HPERC function hours, exceeded such a value, the meter
east gave to zero.
RPM function
RPM engine
This function makes it possible to visua-
lize in real time, the engine speed in
tr/min.
Fig10 RPM Function
Set up
Adjustement of wheel circumference
The modification to the wheel circumfe-
rence, units of measurement and number
of wheel impulses can only be effected
while stationary, maintaining the button
pressed under the TOD function until the
Fig11 set up only information displayed is the wheel
adjustement of wheel circumference circumference and all the other seg-
ments are off (see Fig.11).
It is possible to modify the various figu-
res constituting the value for the wheel
ENDURO
circumference, starting with the largest
figure and moving successively to the
Set up: 2191
lesser one; depending on the digit selec-
SUPERMOTARD
ted, a brief pressure on the button will
increase the figure by one, whilst a lon-
Set up: 1855
ger pressure will enable the selection of
a different figure.
63