SHERCO SE 4.5i-f Manual De Propietario página 86

84
COOLING
1
Make sure that your bike is vertical and
2
on a horizontal surface.
- Place a container under the bike
- Remove the cap 1and the screw 3
- Let the liquid flow out
- Replace the screw 3 with a new washer
- Tighten to 8 Nm
- Loosen the bleed screw 2 on the left
3
radiator and bleed screw 4 on the cylin-
der head
- Fill new new coolant through the radia-
tor filler 1
- As soon as liquid runs through the
screw 4 without bubbles then the screw
2
- Replace the screw 4 with a new was-
her and tighten to 6Nm
- Continue filling
- Once the level is reached (approx. 1,1
litre)
- Put the bike standing on the side stand
and recover the operations described in
page 65
4
To protect the environment, deposit your
purged liquid at a collection center
Vidange
WARNING
Filling
NOTE