Using The Multi-Picture Function; Operating A Jvc Brand Vcr Or Dvd Player - JVC PD-42D30ES Manual De Instrucciones

Televisor a color
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 187
Cancelling the PIP function:
Press the P
P
P
P button or b button.
• If the main-picture signal is poor, the quality of the
sub-picture may also be poor.
• If the pictures have different standards, the top and
bottom of one of them may be missing.
• If an external device is operated, the sub-picture may
disappear. If this happens, press the P
to redisplay the sub-picture.
• You cannot view a scrambled channel in the sub-
picture. If the Y (swap) button is pressed when
viewing a scrambled channel in the main-picture
using an external decoder, the channel you have been
viewing in the sub-picture will appear in both the
main-picture and sub-picture.
• The ZOOM function does not work in the twin-
picture mode.
• Do not press the Y (swap) button while you are
recording the TV output on the VCR. If you do, the
TV output signal will change.
• The BLUE BACK function does not work in the twin
picture mode or the picture-in-picture mode.
• A progressive-scanning picture cannot be displayed
as the sub-picture.
Also:
- When the EXT-4 picture is a progressive-scanning
picture, you cannot choose EXT-4 with the
U p buttons.
- When the EXT-4 picture signal is changed to a
progressive-scanning picture while the EXT-4
picture is displayed as the sub-picture, the PIP
function is cancelled.
- The pictures cannot be swapped when a
progressive-scanning picture from EXT-4 is being
displayed as the main picture.
• The sub-picture cannot be output from the TV.

Using the MULTI-PICTURE function

You can display multi-pictures so you can find a program
you want to view.
1 Press the X
X button to display multi-pictures
X
X
The channels are displayed in the channel number order.
The multi-pictures will appear in one of the two multi-
picture modes.
12-pictures multi:
D0058-EN
4-pictures multi:
Main picture
D0059-EN
• To display the next multi-pictures, press the X
button.
2 Press the U
U p
U
U
p buttons to choose the
p
p
screen you want to see
The chosen picture changes to a moving picture.
P button again
P
P
Still pictures
Moving picture
Still pictures
Moving picture
Remote control buttons and functions
3 Press the a
a
a
a button
The multi-pictures disappear and the chosen picture
appears.
Changing the multi-picture mode:
See "MULTI-PICTURE:" on page 28.
Cancelling the multi-pictures:
Press the b button, the 6 buttons, the number
buttons or the a button.
• Pictures from external devices cannot be displayed in
the 12-pictures multi mode.
• In the 4-pictures multi mode, the picture from
external devices can only be displayed as the main
picture.
Operating a JVC brand VCR or DVD
player
These buttons will operate a JVC brand VCR or DVD
player. Pressing a button that looks the same as the device's
original remote control button has the same effect as the
original remote control.
1 Set the VCR P DVD switch to the VCR or DVD
position
VCR:
When you are using a VCR, set the switch to the VCR
position.
DVD:
When you are using a DVD player, set the switch to the
DVD position.
P (Text):
When you are viewing Teletext programmes, set the
switch to the P (Text) position.
2 Press the VCR/DVD control button to control
your VCR or DVD player
• If your device is not made by JVC, these buttons will
not work.
• Even if your device is made by JVC, some of these
buttons may not work, depending on the device you
are using.
• You can use the p buttons to choose a TV channel
the VCR will receive, or choose the chapter the DVD
player plays back.
• Some models of DVD player use the p buttons for
both operating the fast forward/backward functions
and for choosing the chapter. In this case, the
253 buttons do not work.
21

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Pd-35d30es

Tabla de contenido