Picture Menu; Programme Edit:; Sound Menu - JVC LT-40HG60U Instrucciones De Funcionamiento

OPERATION
3.1 ATV Manual tuning :
Press Source button on the remote control
and select ATV to search the analog TV
channels and fine tune the channels , then
store the channels you selected.
ATV Manual Tuning
_
Storage To 1
System BG
Current CH 1
Frequency 255.25 MHz
Save
NOTE:
Press red button to store the channels
after manual tuning.

4.1 Programme edit:

You can Delete, Rename, Move, Skip,
programmes or set them as favourite.
Delete
Press red button, to delete the highlighted
programme.
Rename:
Only ATV programmes can be renamed.
Move the cursor to the desired programme, press
green button to rename the programme.
Press to choose the character. Press
move the cursor .
Press MENU button to exit edit , Press EXIT to
exit the menu.
Note: ATV programmes name only can be 5
characters long.
Use the Arrow Buttons to select the channel you
wish to move. Then press the Yellow Button to
select Move function. Once active, use the Arrow
Buttons to move and then press OK to confirm.
Press to choose the programme, press
blue button to skip this programme. The
show on the right side of the programme.
To cancel the skip, choose the skipped programme
and press blue button again. The
Favourite
Press to choose the programme, press FAV
button , it will show
programme. To cancel the FAV setting, choose the
favourite programme and press FAV button again.
will disappear .
Once your favourite group is created, you can
press the FAV key to quickly access your favourite
channel.
EN
18
+
Search
Fine-Tune
MENU
will disappear.
on the right side of the
5.1 Signal information
This menu includes information on channels,
networks, modulation, quality and strength.
5.2 CI information: (optional)
This menu can display the CI card' s information.
5.3 Software update (USB)
This menu enables you to upgrade your
software via USB, only if the manufacturer
asks you to and provides you the appropriate
file. Follow the on-screen prompts.

2. PICTURE MENU

The second item of the MENU is PICTURE MENU.
You can adjust picture effect here, such as
contrast, brightness, etc.
Press to move, press OK to adjust.
<
PICTURE
Picture Mode
Contrast 50
Brightness 50
Color 50
Sharpness 50
Tint 50
to
Aspect Ratio
Zooml
Zooml2
NOTE:
1).Tint is available in NTSC system only.
2).There are four colour temperature modes that
can be selected: Medium, Warm, Cool, User.
will
3).Screen is available in PC mode only. You
can adjust Horizontal position, vertical position,
size and phase.

3.SOUND MENU

The third item of the MENU is the SOUND MENU.
You can adjust the sound effect here such as
treble, bass, balance etc.
Press to move, press OK to adjust.
<
SOUND
Picture Mode Standard
Color Temperature
Aspect Ratio
Noise Reduction
Screen
Color Temperature
Standard
Red 62
Green 49
Blue 46
MENU
MENU
Noise Reduction
Auto Off
4:3
Low
16:9 Middle
High
MENU
MENU
Sound Mode Standard
Balance
Auto Volume
Surround Sound
>
AD Switch Off
SPDIF Mode Pcm
>
Medium