Chapter 5
Selecting menu language
You can choose your preferred menu language
following the instructions below.
1. Press MENU to display the main menu.
2. Press ▲/▼/◄/► to select Settings > Setup, then
press OK to enter.
3. Select Language and press OK/► to enter.
4. Press ◄/► to select your desired language in the
Language menu to display the menus.
5. Press EXIT to close the menu.
Using more of your TV
Setting up your favourite channels
You can create a list of your favourite TV channels.
1. Press LIST.
2. Press the yellow button to enter Channel list
selection. Press ▲/▼ to select Favorite list and
press OK to enter.
3. Press the blue button to start editing your favourite
list. Press ▲/▼ to scroll through the channel list
and press OK to select or deselect it.
4. Repeat this procedure to set up other favourite
channels.
5. Press LIST/EXIT to exit.
Shortcut operation: Press FAV on the remote
control to directly enter Channel list selection.
Energy saving
1. Press MENU on the remote control and select
Settings > Setup > ECO Settings > Energy
Saving.
2. Press ◄/► to select a desired power saving mode
to achieve the desired power saving effect.
3. Press EXIT to close the menu.
Shortcut operation: Press ECO on the remote
control to select a desired power saving mode
directly.
Viewing TV using the 3D function
(only for LT-46HW65U)
WARNING:
• Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea and
headaches. If you experience any such symptom,
stop viewing 3D TV, remove your 3D glasses and
rest.
• Watching 3D videos too closely or for a long period
of time may harm your eyesight.
• A responsible adult should frequently check on
children who are using the 3D function.
• Do not use the 3D glasses for any other purpose
than viewing 3D videos on a 3D TV.
• Do not use the 3D function or 3D glasses while
walking or moving around, otherwise this may result
in injuries due to running into objects, tripping, and/
or falling.
1. Press MENU on the remote control and select
Picture > 3D navigation, then press ◄/► to
adjust 3D navigation to Manual.
3D mode
3D-to-2D
Depth of field
Protrude
Distance to TV
Image safety
L-R switch
Select
Back
Exit
Note: If 3D navigation is set to Auto, the settings
will be configured automatically.
2. 3D Mode: Wear the 3D glasses first, then
press ◄/► to select the right 3D input format
among Sideby-Side, 2D-to-3D, Top and Bottom
and Line interleave.
3. L-R Switch: Select On or Off to adjust the 3D
video between the left and right eyes for better 3D
viewing.
4. Depth of Field: Achieve a good 3D effect with the
image converted from the 2D image.
5. 3D-to-2D: Select Left or Right to display the
image in 2D mode (no 3D effect). This function is
deactivated when 3D Mode is set to 2D-to-3D or Off.
6. Press EXIT to close the menu.
Notes:
- 3D glasses from other manufacturers may not be
supported.
- All photo functions are disabled in 3D mode.
- If you change to a different signal source
or access Smart TV, the 3D mode will be
automatically disabled.
- Some 3D modes may not be available depending
on the input format of the 3D video source.
- Supported 3D modes:
Analogue TV, AV, CMP: 2D-to-3D
Digital TV, HDMI, USB, Videos from the Internet:
Top and Bottom, Side-by-Side, 2D-to-3D, Line
interleave, Frame sequential.
- 3D function in USB mode: During the playback
of a selected video from USB, press MENU to
display the video menu in the browser mode,
then select 3D Mode. For more detail information,
refer to the above related descriptions.
Audio description
Audio description refers to an additional narration
track for blind and visually impaired viewers of visual
media, including television programmes and movies.
The description narrator talks through the presentation
describing what is happening on the screen during
the natural pauses in the audio (and during dialogue if
deemed necessary).
EN 10
Using more of your TV
3D
2D-to-3D
Off
16
16
10
Off
Off