Technical Support - Siemens SITRANS P500 Instrucciones De Operación

Certificates and approvals
Explosion protection for China (to
•
NEPSI)
Certificate of Compliance for Ex i
•
Designation
Permitted ambient temperature
Entity parameters (XP/DIP)
Effective inner inductance
Effective inner capacitance
Certificate of Compliance for Ex d
•
Designation
Permitted ambient temperature
Connection "nA, ic"
Certificate of Compliance for Zone 21
•
/22
Designation
Connection "nA, ic"
A Appendix A
A.1 Certificate
The certificates can be found on the enclosed CD and on the Internet under:
Certificates (http://www.siemens.com/processinstrumentation/certificates)
A.2

Technical support

Technical Support
You can contact Technical Support for all IA and DT products:
● Via the Internet using the Support Request:
Support request (http://www.siemens.com/automation/support-request)
● E-mail (mailto:support.automation@siemens.com)
● Phone: +49 (0) 911 895 7 222
● Fax: +49 (0) 911 895 7 223
Further information about our technical support is available on the Internet at
Technical support (http://www.siemens.com/automation/csi/service)
Industry Online Support
In addition to our documentation, we offer a comprehensive knowledge base on the Internet at:
Service&Support (http://www.siemens.com/automation/service&support)
32
Ex ia/ib IIB/IIC T4
-40 ... +85 °C (-40 ... +185 °F)
To certified intrinsically-safe circuits with the following peak values:
U = 30 V, I = 100 mA
i i
P = 750 mW
i
L = 400 μH
i
C = 6 nF
i
Ex dia IIC T4/T6
T4: -40 ... +85 °C (-40 ... +185 °F)
T6: -40 ... +60 °C (-40 ... +140 °F)
U = 10.5 ... 45 V DC
m
DIP A21 TA,T120 °C IP68 D21
U = 10.5 ... 45 V DC
m
SITRANS P500 with HART
A5E02344532-04, 12/2014