Installation; Setting Up The Product - Coway AIRMEGA 400S Manual De Instrucciones

03 INSTALLATION

Setting Up the Product

Before using the product, you must remove the plastic wrapping of the inserted Max2 filters on both sides.
CAUTION
Make sure that the power cord is unplugged before opening the covers.
2
1
14
1
Max2 filter Pre-filter Cover
Max2 filter Pre-filter
2
1
Remove the both sides of covers and
filters in the following order.
Covers ▶ Pre-filters ▶ Max2 filters
2
Remove the plastic wrapping for
Max2 filters on both sides.
Discard the plastic wrapping for Max2 filters.
When removing the plastic wrapping from
•
the filters, be careful not to damage the
surface of filters.
Do not allow children to play with the
•
plastic wrapping.
3
Cover
Return the both sides of filters and
covers in reverse order at the first
step.
Max2 filters ▶ Pre-filters ▶ Covers
NOTE
Place the Max2 filters into the filter case
•
with the green side facing the product.
Reversed placement may affect the filter
lifetime.
The product will not turn on if the right and
•
left covers are installed incorrectly.
CAUTION