Coway AIRMEGA 400S Manual De Instrucciones página 26

How to replace the Max2 Filter
When the [Max2 Change] indicator is on, replace your Max2 filters on both sides. Follow these instructions below to
replace the filters.
2
Max2 filter
1
26
1
Pre-filter Cover
Max2 filter Pre-filter Cover
2
1
Remove the both sides of covers and
filters in the following order.
Covers ▶ Pre-filters ▶ Max2 filters
2
Remove the plastic wrapping for the
new Max2 filters and discard it.
Discard the old Max2 filters. These are not
reusable.
CAUTION
When removing the plastic wrapping from
•
the filters, be careful not to damage the
surface of filters.
Do not allow children to play with the
•
plastic wrapping.
3
Return the both sides of filters and
covers in reverse order at the first
step.
Max2 filters ▶ Pre-filters ▶ Covers
NOTE
Place the Max2 filters into the filter case with
•
the green side facing the product. Reversed
placement may affect the filter lifetime.
The product will not turn on if the right and
•
left covers are installed incorrectly.
4
Touch and hold the [Max2 Change]
button on the control panel to reset
the filter indicator.
NOTE
After replacing the Max2 filters, you must
reset the filter's replacement cycle using
the [Max2 Change] button.