LG TCW2013QS1 Manual Del Propietário página 36

36
PROGRAMMING MODE - SETUP MODE
11-2. Non-stop rinse
Enter setup mode.
You will see LqC1
NOTE
• (rinse spin enable) is not available in
Press the Hot button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Display .
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press Warm or Cold button and then select
or
.
Disable
Enable
Press the Start button.
The machine sets up the non-stop rinse, then advances
to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the Hot button twice.
Button
option.
Display
appears
appears
appears
One or the other will
display.