Time Set Up - LG TCW2013QS1 Manual Del Propietário

64
PROGRAMMING MODE - TEST MODE

3. Time set up

Enter setup mode.
You will see LqC1
NOTE
• When the machine is switched off, Time setup is initialized.
Press the Warm or the Cold button until
in the display.
Press the Start button.
The display will cycle through 2000 --> 0101 --> Sat -->
0000 repeatedly.
Press the Start button.
Press Warm (+) or Cold (-) button to select year
between 2000 and 2099.
Press the Start button.
The machine sets up the year, then advances to the
next process automatically.
Press Warm (+) or Cold (-) button to select a month
between 01 and 12.
Press the Start button.
The machine sets up the month, then advances to the
next process automatically.
Press Warm (+) or Cold (-) button to select the day
between 01 and 31.
Press the Start button.
The machine sets up the day, then advances to the next
process automatically.
Press Warm (+) or Cold (-) button to select the hour
between 00 and 23.
Press the Start button.
The machine sets up the hour, then advances to the
next process automatically.
Press Warm (+) or Cold (-) button to select minute
between 00 and 59.
Press the Start button.
The machine sets up the minute.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the Hot button twice.
Button Display
appears