LG TCW2013QS1 Manual Del Propietário página 56

56
PROGRAMMING MODE - SETUP MODE
25. Time to keep the coin (Use only for coin type)
Enter setup mode.
You will see LqC1
Press the Hot button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Display previous value.
Press Warm(+) or Cold(-) button to select button to
select time between 0 ~ 180.
Press the Start button.
The machine sets up the time to keep the coin, then
advances to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the Hot button twice.
Button Display
appears
appears