LG TCW2013QS1 Manual Del Propietário página 67

6. Password -
How to change the password.
Enter setup mode.
You will see LqC1 Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm button until
display.
Set up the number you want
By pressing Warm or the Cold button.
For example, If you want to change password number
to No. 5.
Press the Warm button until
display.
Press the Start button, then Password change is done.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready
NOTE
• Default password is 3.
If you want to change the password, you must know the present password.
is displayed.
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types – Push the Hot button twice.
PROGRAMMING MODE - TEST MODE
Button
appears in the
appears in the
Display
appears
67