Beep Volume - LG TCW2013QS1 Manual Del Propietário

24. Beep volume

Enter setup mode.
You will see LqC1
Press the Hot button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Display previous value.
Press Warm(+) or Cold(-) button to select
High or Low or Off.
Press the Start button.
The machine sets up the beep volume, then advances
to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type – Turn on/off toggle switch.
• Card type – Insert the service card.
• All types – Push the Hot button twice.
PROGRAMMING MODE - SETUP MODE
Button Display
appears
appears
55