68
PROGRAMMING MODE - TEST MODE
7. Tub clean -
To clean up the tub, please run the TUB CLEAN cycle.
Enter setup mode.
You will see LqC1
NOTE
• Never load laundry while using TUB CLEAN. The laundry may be damaged or become contami-
nated. Make sure to clean the washer tub when it is empty.
• Leave the door open after finishing the laundry to keep the tub clean.
• TUB CLEAN should be repeated monthly.
• Safely and conveniently secure the door slightly ajar with a magnetic door plunger. This will
promote air circulation and allow the interior of the machine to dry.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Display will show the remaining time.
When the TUB CLEAN cycle is finished,
displayed with beeping.
Go back to ready mode.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types – Push the Hot button twice.
Button
Display
appears
is