Replacing The Batteries - koban KM 8212 Manual De Instrucciones

presence of voltage. Socket design,
insulation thickness and other
factors may affect readings.
• The NCV indicator LED may flash
while measuring DC/AC voltage
due to the presence of induced
voltage.
Maintenance
Warning
To prevent electric shock and
damage to the meter or personal
injury, remove test lead before
opening battery cover.

Replacing the batteries

• When the symbol
indicates the batteries need to be
replaced.
• Unscrew the battery cover and
remove it from the meter.
• Replace the used batteries with
new AAA batteries.
• Replace the battery cover and
secure it to the meter.
Replacing the test lead
(or alligator clip)
Warning
Replacement leads must be of the
same rating or higher as the leads
supplied with the meter:
800v 10a.
www.grupotemper.com
• External environmental
interference from additional
sources can falsely trigger NCV
detection.
lf the test lead's insulation is
damaged or has any wires exposed,
the leads need to be replaced.
Accesories
Test lead
Alligator clip Rating: 600V 10A 1
Batteries
Manual
appears, it
KM 8212
Pen type multimeter
Rating: 600V 10A
(T3060A)
1.5V AAA
Instructions manual |
1
2
1
35