KM 8212
Pen type multimeter
Buttons and functions
Function buttons
Button
Function
Any mode
Any mode
Any mode
Rotary switch: select between
functions.
• Test probe: for
measurements.
• COM jack: commoen test lead
input.
• LCD display: shows results of
measurements.
• LED indicator: in Logic mode,
green inicated low level, red
indicated high level.
• Probe cover:b used when
making category III or higher
measurements. Twist to remove
if making category II or lower
measurements.
Instructions manual |
24
Description
Press to hold the current reading on the
display. Hold the button while turning
on the meter to turn off the auto
npower off feature.
Switch ranges in manual-range.
Hold to return to auto-range.
Press to hold the maximun measured
value on the display.
Hold for non-contact voltage detection.
Switch between AC and DC voltage.
Hold down for Logic level test.
Switch between resistance, diode and
continuity modes. Switch between AC
and DC current.
• Protection ring: keep hands behind
the protection ring and away from
the probe to avoid injury.
www.grupotemper.com