Dimensions For 27" Under-Counter Units; Dimensions For 30" Wall-Mounted Units - Thermador MASTERPIECE Serie Manual De Instrucciones

Dimensions for 27" Under-Counter Units


 PP
ë
 PP
* Includes ¾" (19 mm) base plate. For single ovens
installed under a cabinet, the junction box should be
located to the right of the unit within reach of the power
cord.
It is good practice, when oven is installed at the end of a
cabinet run, adjacent to a perpendicular wall or cabinet
door, to allow at least 1/4" space between the side of the
oven and the wall/door.
For oven support, install 2x4's extending front to back
flush with the bottom and the side of the opening. The
supporting base must be well secured to the floor/
cabinet and level.
Note: The cabinet base must be flat and capable of
supporting a weight of at least 193 lbs (87 kg).
  PP
é  PP

 PP
ê
 PP

Dimensions for 30" Wall-Mounted Units

30" Single Oven
é
 PP
 ë
 PP

 PP

 PP
ê

 PP
 PP

 PP
Wall Installation 30" Single Oven:
ê
 PP
It is good practice, when oven is installed at the end of a
cabinet run, adjacent to a perpendicular wall or cabinet
door, to allow at least 1/4" space between the side of the
oven and the wall/door.
For oven support, install 2x4's extending front to back
flush with the bottom and the side of the opening. The
supporting base must be well secured to the floor/
cabinet and level.
NOTICES
The conduit box must be installed either above or
▯
below the unit. If the conduit box is installed below the
unit, a 2" diameter hole or space is required between
the back wall and the right rear of the 2x4 supports.
The cabinet base must be flat and capable of
▯
supporting a weight of at least 212 lbs (96 kg).

 PP

 PP

 è
 PP
 PP

 PP

 PP
é
 PP

 PP
PLQ ë
PD[ 
   PP
15