Dimensions For 30" Under-Counter Units - Thermador MASTERPIECE Serie Manual De Instrucciones

30" Combo Oven with Microwave and Warming Drawer
Wall Installation 30" Combo Oven with Microwave and
Warming Drawer:
ê
 PP
It is good practice, when oven is installed at the end of a
cabinet run, adjacent to a perpendicular wall or cabinet
door, to allow at least 1/4" space between the side of the
oven and the wall/door.
For oven support, install 2x4's extending front to back
flush with the bottom and the side of the opening. The
supporting base must be well secured to the floor/
cabinet and level.
NOTICES
The conduit box must be located above the unit to
▯
facilitate connecting and servicing.
The cabinet base must be flat and capable of
▯
supporting a weight of at least 429 lbs (195 kg).
ë
 PP

 PP
PLQ ë
PD[ 
   PP

Dimensions for 30" Under-Counter Units


 PP
ë
 PP
* Includes ¾" (19 mm) base plate. For single ovens
installed under a cabinet, the junction box should be
located to the right of the unit within range of the power
cord.
It is good practice, when oven is installed at the end of a
cabinet run, adjacent to a perpendicular wall or cabinet
door, to allow at least 1/4" space between the side of the
oven and the wall/door.
For oven support, install 2x4's extending front to back
flush with the bottom and the side of the opening. The
supporting base must be well secured to the floor/
cabinet and level.
Note: The cabinet base must be flat and capable of
supporting a weight of at least 212 lbs. (96 kg).
  PP
é  PP

 PP
ê
 PP
17