Diono Radian 3 RXT Manual De Instrucciones página 16

Convertible todo en uno, desde el nacimiento hasta las, 120 lb / 54 kg
Ocultar thumbs Ver también para Radian 3 RXT:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

REAR-FACING INSTALLATIONS:
5–50 lb (2.3–22.7 kg)
Infants who weigh less than 22 lb (10 kg) and are under
1 year old, MUST use this car seat rear-facing.
Place car seat rear-facing in the vehicle back seat.
Make sure LATCH strap or vehicle seat belt is routed
LATCH Strap
through the rear-facing belt path marked with the
blue text and rear-facing illustrations.
REAR-FACING BELT PATH
Install this car seat tightly in your vehicle. The car
seat should not move at the rear-facing belt path
location by more than 1 in. (2.5 cm) from side-to-
side, front-to-back. If using a lap belt only, refer to
your vehicles owners manual for installation advice.
Vehicle Lap/Shoulder Belt
Harness straps MUST be at or just below the top of your
child's shoulders. Place the chest clip at armpit level.
The American Academy of Pediatrics (AAP) and NHTSA
recommend that children be rear-facing until they reach
the maximum rear-facing height and weight. This
car seat can remain rear-facing up to 50 lb (22.7 kg).
Vehicle Lap Belt
Rear-facing top tether is available. For rear-facing top
tether installation instructions, refer to pages 24–25.
30
31
1-855-463-4666
diono.com

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido