Configuring Remotely Controlled Adjustment Of Power Factor - SMA PLA Option FLX Serie Guia De Instalacion

Setup
2.1.3 Configuring Remotely Controlled
Adjustment of Power Factor
To configure the remotely controlled Power Level
Adjustment, choose the 'Power factor' submenu.
•
Set the 'Remotely controlled Power Factor' radio
button.
•
Configure the relay states (K1–K6) according to
the requirements of the DNO by entering the
Illustration 2.4 Configuring Power Factor
The inverter runs according to the entered Power Factor
value.
L00410649-02_2q / Rev. date: 2014-06-20
appropriate Power Factor setpoint for each relay
state specified by the DNO.
2 2
11