Honda NX4 Falcon Manual Del Propietário página 138

Owner´s Manual
A drive chain with damaged rollers, loose pins, or
missing O-rings must be replaced. A chain which
appears dry, or shows signs of rust, requires
supplementary lubrication. Kinked or binding links
should be thoroughly lubricated and worked free.
If links cannot be freed, the chain must be replaced.
Damaged sprocket teeth
Replace
Normal sprocket teeth
Worn sprocket teeth
Replace
GOOD
Adjustment
Drive chain slack should be checked and adjusted, if
necessary, every 1,000 km (600 miles). When operated
at sustained high speeds or under conditions of
frequent rapid acceleration, the chain may require
more frequent adjustment.
(5) (3)
(5)
(4)
(4)
(2)
(1) Rear axle nut
(2) Lock nuts
(3) Adjusting nuts
(4) Index marks
(5) Rear edge of adjusting
slots
(1)
57