Honda NX4 Falcon Manual Del Propietário página 148

Owner´s Manual
Removal
1. Make sure the ignition switch is OFF.
2. Remove the seat (page 34).
3. Remove the right side cover (page 35).
4. Remove the bolt (1) and battery holder (2).
5. Disconnect the negative (–) terminal lead (3) from
the battery first, then disconnect the positive (+)
terminal lead (4).
6. Pull out the battery (5) from the battery box.
(1)
(2)
(4)
(5)
(3)
(1) Bolt
(2) Battery holder
(3) Negative (–) terminal lead
(4) Positive (+) terminal lead
(5) Battery
Installation
1. Reinstall in the reverse order of removal. Be sure to
connect the positive (+) terminal first, then the
negative (–) terminal.
2. Check all bolts and other fasteners are secure.
67