Spark Plug - Honda NX4 Falcon Manual Del Propietário

Ocultar thumbs Ver también para NX4 Falcon:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

52
NOTICE
Improper installation of the oil filter can cause serious
engine damage.
(6)
(5)
5. Reinstall the oil filter cover, making sure the bolts
are tightened securely.
Oil Filter Bolt Torque:
12 N·m (1.2 kgf·m, 9 lbf·ft)
6. Perform steps 5 – 9 of "Engine Oil".
Engine oil after draining and oil filter change:
1.8 l l l l l (1.9 US qt, 1.6 Imp qt)
(5) Rubber seal
(6) OUT-SIDE mark

Spark Plug

(Refer to the Safety Precautions on page 43.
Recommended plugs:
Standard: DPR8Z (NGK) or X24GPR–U (DENSO)
For cold climate: (Below 5°C, 41°F)
DPR7Z (NGK) or X22GPR–U (DENSO)
For extended high speed riding:
DPR9Z (NGK) or X27GPR–U (DENSO)
For most riding conditions this spark plug heat range
number is satisfactory. However, if the motorcycle is
going to be operated for extended periods at high
speeds or near maximum power in hot climates, the
spark plug should be changed to a colder heat range
(a higher number).
NOTICE
Never use a spark plug with an improper heat range.
Severe engine damage could result.
Owner´s Manual
)

Hide quick links:

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido