Removal From Storage - Honda NX4 Falcon Manual Del Propietário

Owner´s Manual
5. Wash and dry the motorcycle. Wax all painted
surfaces. Coat chrome with rustinhibiting oil.
6. Lubricate the drive chain (page 60).
7. Inflate the tyres to their recommended pressures.
Place the motorcycle on blocks to raise both tyres
off the ground.
8. Cover the motorcycle (don't use plastic or other
coated materials) and store in an unheated area,
free of dampness with a minimum of daily
temperature variation. Do not store the motorcycle
in direct sunlight.

Removal from Storage

1. Uncover and clean the motorcycle.
Change the engine oil if more than 4 months have
passed since the start of storage.
2. Charge the battery as required. Install the battery.
3. Drain any excess aerosol rust-inhibiting oil from the
fuel tank. Fill the fuel tank with fresh petrol.
4. Perform all Pre-ride Inspection checks (page 35).
Test ride the motorcycle at low speeds in a safe
riding area away from traffic.
75