Using Your Robot; Preparing The Room For A Cleaning Run; Functions Of The Start/Stop Button; User Interface Signals And Their Meaning - Philips FC8832 Manual Del Usaurio

Using your robot

Preparing the room for a cleaning run

Functions of the start/stop button

How you press start/stop button
Press start/stop button for 1 second
Press start/stop button briefly
Press start/stop button for 3 seconds
1 sec.

User interface signals and their meaning

Signal Description of signal
The start/stop button is continuously green.
The start/stop button flashes green slowly and the
display on the robot shows a moving blue light (the
charging indicator).
The start/stop button is continuously orange.
Before you start the robot on its cleaning run, make sure that you remove all
loose and fragile objects from the floor. Also remove all cables, wires and
cords from the floor.
The start/stop button has the following functions:
How robot responds
Robot switches from sleep mode to standby
Robot starts or stops cleaning
Switches robot on or off.
The robot has a start/stop button that gives light signals and a display that
gives signals. The table below explains the meaning of the signals.
3 sec.
Meaning of signal
The robot is ready to clean.
The robot is charging.
The rechargeable battery is low and
the robot is searching for the docking
station.
English
13