Grillo G52 Uso Y Mantenimiento página 18

Translation of the Original Instructions
ORIENTABLE AND TILTING SWEEPER – 80 cm
This sweeper (fig. 20) is very useful to clean roads and squares. It can also be used to clean up
10-12 cm high fresh snow and it can be steered left or right to make drifts. The sweeper can be
attached to the attachment coupling. The handlebar must be turned 180° over the engine: to mount
the sweeper follow the instructions described above for the cutting bar.
BACK-CUTTER FURROWER
This tool is mounted at the rear of the tiller and works in tandem with it. The furrower is designed to
produce irrigation and seed drills (fig. 21).
CAUTION: Before connecting or removing the back-cutter furrower, ALWAYS SWITCH OFF
THE ENGINE. Keep your hands and feet away from the rotary tiller hood when the engine is
running, rotation of the tiller is highly dangerous.
FRONT BLADE 80 cm
This highly resistant device is ideal for removing snow and levelling mounds of soil or gravel. May
be tilted to the right and left (fig. 22) and can be connected directly to the frame for attachments.
The handlebar must be turned of 180°, placing it on the engine's side. Follow the instructions
described above for the assembling of the cutting bar.
WHEELS SPACERS
These screw spacers allow to expand the track and therefore improve the machine stability on
slopes. They have to be mounted between wheels and the gearbox housing (fig. 23).
WARNINGS FOR TRANSPORT
Walking tractors cannot be used on public roads. If the machine is to be transported on a lorry or a
trailer, lower the handlebar, engage the 1 st gear, fasten the walking tractor to the lorry/trailer using
ropes or belts. If a lifting machine is used to lift the walking tractor from the ground into the
lorry/trailer make sure its lifting capacity its suitable for the walking tractor.
14