TP TP837 Manual Del Usuario página 23

tp838 Explorer 21/1/09 09:36
1
Thank you for purchasing the tp Explorer for your family.
As this is a self-assembly product, please check the contents of this pack (including nuts & bolts), and read the instructions in full at the earliest
opportunity. In the unlikely event that you have a query, please ring customer services on 01299 872804.
Allow sufficient time to build your Explorer, and please follow the instructions carefully for safe assembly and use.
Please retain this instruction booklet. It contains important maintenance instructions, which you should follow to ensure years of safe play. It is also
your Guarantee (see page 16). It is essential that you register your purchase by returning one Guarantee Registration Card, which you will find in this
pack, listing all the products you have purchased. Thank you.
Assembly and Safety Information
tp
toys must be assembled by an adult, exactly in accordance with the assembly instructions. Enlisting the aid of a helper will make assembly easier.
In order to ensure the correct tensions and to ease assembly, it is important to assemble the product hand tight to begin with. Only when complete,
should the fastenings be fully tightened and checked. This pack may contain small parts. Please keep it away from children under 36 months.
Please take care during assembly as the manufacturing process can sometimes result in the occasional sharp edge and small pieces of waste
metalwork. Should there be any missing parts, the toy must not be used until replacement parts have been fitted - the
+44 (0)1299 872804 (English Speaking). E-mail: customerservices@tptoys.com
Siting
Under no circumstances should any of our toys be positioned on hard surfaces such as concrete or asphalt, unless the ground under the toy plus the
recommended Safe Area is covered with a safety surface. Examples of suitable surfaces are grass, sand or a play surface intended for this use.
tp
Never allow toys to be placed or used near a fire.
Recommended Safe Play Area
The Safe Play Area refers to the zone extending 2m beyond the play set on all sides, including the space above the apparatus (see page 15).
Additional accessories may increase the size of the Safe Play Area. The ground surafce must be level. Installing your playset on sloping ground can
cause it to lean or 'rack'. This puts additional stress on all the connections and joints and in time will cause them to fail. The Safe Play Area must be
free from all structures, landscaping, trees and branches, rocks, wires, sprinkler heads and other similar obstacles to safe play. Children can be
seriously injured running or swinging into these obstacles.
Usage
This toy is
designed and made for family domestic use only by children aged between toddler and 12 years, and must not be used by anybody
else. Misuse can result in injury.
Supervision
Children should always be supervised while they are playing on
manner. We recommend that they do not wear loose-fitting clothing or jewellery that may catch or snag during play. Children should not wear cycle
helmets while playing on
Weather Conditions
Special care should be taken as weather conditions change. In particular, outdoor toys can become slippery in wet weather and tongues and lips
can stick to metalwork at subzero temperatures. In warmer and sunnier weather, parts can become hot, and the temperature should be regularly
checked during play, especially metal parts and slides. If there is any doubt over safety then the toys should not be used.
Water Play
Many surfaces can become slippery during water play. Extra caution and supervision is required when combining water (e.g. paddling pools, aqua
slides etc.) with other forms of outdoor play.
With all toys it is vital that the equipment is checked regularly and often by an adult. The complete toy should be checked at least once a month,
and particular attention should be paid to connections and fastenings. If any part exhibits signs of wear and tear, they may need to be replaced.
Failure to do this may result in product malfunctioning and causing injury. Children must not be allowed to use the toy until properly installed and
checked. Galvanised tubular products may require occasional maintenance. If surface rust appears it should be removed with either a wire brush or
coarse sandpaper, and the area treated with a non-toxic paint.
This is a growable frame only. The joints between the main uprights and the extensions can become very tight after only a few months of outdoor
exposure. If you want the ability to reduce your frame height, you will have to protect these joints by spraying all sufaces (including inside the bore)
with WD40 or applying a similar product before assembly.
These instructions are issued in the interest of child safety, and we do ask you to follow our advice.
tp
Made in England by: Activity Toys Limited.
Page 6
INSTRUCTIONS FOR ASSEMBLY, MAINTENANCE AND USE OF
Please read carefully and keep all enclosed information for future reference.
ASSEMBLY AND SITING
tp
toys.
PLAY SAFELY
tp
toys and should be instructed not to use the toy in an inappropriate or hazardous
MAINTENANCE
6
tp
TOYS
tp Customer Services line is
Explorer