Leister Varimat V2 Instrucciones De Funcionamiento página 18

Congratulations on purchasing an automatic hot-air welding machine VARIMAT V2 !
GB
You have chosen a top-class automatic hot-air welding machine made of high-quality materials.
This device has been developed and produced according to the latest welding technologies.
USA
Every VARIMAT V2 passes stringent quality checks before leaving the factory in Switzerland.
Table of contents
Quick info
Application, warning, caution
Conformity, disposal, technical data
Description of device, controls
Transport
Joining force, operating preparation, drive sensor adjustment
Device positioning, welding procedure
Button combinations
Work mode (chapter 1)
Profil setup (chapter 2)
FAQ
Types of Leister VARIMAT V2, accessories, training, maintenance, service and repair, warranty
Quick info
How do I start the automatic hot-air welding machine VARIMAT V2 ?
1. Connect power supply cord to the line/mains
2. Main switch (3) ON
3. Press Drive button
4. Press Heating button
5. Press e-Drive
6. Carry out a test weld according to the welding instruction of the material manufacturer
and national standards or guidelines. Approve test weld.
7. Welding
How do I switch off the automatic hot-air welding machine VARIMAT V2 ?
1. Press e-Drive
2. Press «Cool down OK» e-Drive
tes (Fig. 2). Blower switches off automatically.
3. After welding nozzle (9) has cooled down, main switch (3) OFF
OFF
18
1.1 Setpoint display
1.2 Work display
1.3 Setting the drive speed
1.4 Setting the welding temperature
1.5 Setting the air volume
1.6 Length measurement, blower and drive counter
1.7 Selecting profiles
1.8 Cooling down
1.9 Standby
1.10 Error messages
2.1 Creating profiles
2.2 Standby setup
ON
Heating up time approx. 3 - 5 minutes
(Fig. 1).
and allow to cool approx. 4 minu-
Turn e-Drive
Turn e-Drive
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
(Fig. 1) (Fig. 2)
18
19
20
21
22
23
24
25
25
26
27
28
29
30
30
31
31
32