Pulsar TRAIL Manual De Instrucciones página 11

Enter the main menu with a long press of the M (4)
=
button.
Enter the submenu "Zeroing profile" with a short
=
press of the M button.
Select one of the zeroing profiles (shown with
=
letters A; B; C) with the UP (3) and DOWN (5)
buttons.
Confirm you selection with a short press of the M
=
button.
The name of a selected profile is displayed in the
=
status bar.
This main menu option allows you to select reticle
Reticle setup
shape, color and brightness.
Selection of reticle shapes.
Enter the main menu with a long press of the M (4)
=
Reticle type
button.
Enter the submenu "Reticle type" with a short
=
press of the M button.
Select the desired reticle shape out of the list of 13
=
reticles with UP (3) and DOWN (5) buttons.
The reticle types change as the cursor goes down
=
the reticle list.
Confirm you selection with a short press of the M
=
button.
Selection of reticle color
Enter the main menu with a long press of the M (4)
=
Reticle color
button.
Enter the submenu "Reticle color" with a short
=
press of the M button.
Select the desired reticle color: black or white -
=
with UP (3) and DOWN (5) buttons.
Confirm you selection with a short press of the M
=
button.
15
Reticle brightness setup
Enter the main menu with a long press of the M (4)
=
Reticle
button.
brightness
Enter the submenu "Reticle brightness" with a
=
short press of the M button.
1
Set the desired reticle brightness from 0 to 10 with
=
UP (3) and DOWN (5) buttons.
. .
. .
Confirm your selection with a short press of the M
. .
=
. . button.
.
Adding new distance:
To zero your weapon, you need to set a zeroing
Zeroing
distance first.
You can zero your weapon at any distance ranging
+
from 1 to 910m (1 to 955 yards).
Enter the main menu with a long press of the M (4)
=
button.
Select main menu option
=
short press of the M button.
Enter the submenu "Add new distance"
=
short press of the M button.
Set the values for each digit with the UP (3) and
=
DOWN (5) buttons. Switch between the digits
with a short press of the M button.
Having set the desired distance, hold down the M
=
button to save it.
The distance you set first becomes a primary
=
distance – shown with icon
distance value.
Note: max. number of zeroing distances is 10 for
each profile.
Operating the distances:
Enter the main menu with a long press of the M (4)
=
button.
Select main menu option
=
short press of the M button.
Enter the submenu operating the distances
=
and enter it with a short press of the M button –
distances at which zeroing has been done will be
shown.
300m ....
+7.0
600m ....
0
+
and enter it with a
with a
+
+ 150m
on the right to the
0
and enter it with a
16