Pulsar TRAIL Manual De Instrucciones página 20

Problem Check
Smartphone or tablet Password in the unit was
PC cannot be changed.
connected to the
sight.
There is no image of You are looking through
the object under glass.
observation.
Poor image quality / Problems described may arise in adverse weather conditions
Detection range (snow, rain, fog etc.).
reduced.
When using the Because of variations in thermal conductivity, objects
scope at below zero (surrounding environment, background) under observation
temperatures the become warm more quickly at above-zero temperatures, which
image quality is allows higher temperature contrast and, thus, the quality of the
worse than at image produced by a thermal imager will be better.
At low operating temperatures, objects under observation
positive
(background) normally cool down to roughly identical
temperatures.
temperatures, which leads to lower temperature contrast, and to
image quality (precision) degradation. This is normal for thermal
imaging sight.
Click on the link to read FAQs on thermal vision
http://www.pulsar-nv.com/support/faq/
33
Corrective action
Delete network and connect
again inserting the password
saved in the sight.
Remove glass from the field of
view.
NOTES
34