Optional Inter-Connect Kit; (Models Gir36, Gir48 & Gir60) - Garland G Serie Instrucciones De Instalación Y Operación

INSTALLATION Continued

Optional Inter-Connect Kit

The gas supply of the range mounted salamanders may be inter-connected with the supply of the range, so both units
are supplied from a single gas connection. The supply gas piping should be a minimum of 1" (25mm) diameter to ensure
enough gas capacity is available at the specifi ed pressure to supply the total combined input rating of both appliances. The
components comprising the optional inter-connect kit are shown below.
Optional Interconnect Gas Kit #4531606 - Version 1, Connecting to a 36in Range
5
TO INLET OF SALAMANDER/
CHEESEMELTER MANIFOLD
8
ATTACH SUPPORT CLAMP (ITEM 7 - 2640800)
TO SUPPORT BRACKET ( ITEM 6 - 2640700)
WITH (2)#10-24 SELF-TAPPING SCREWS (ITEM 12
F32 - NOT SHOWN) PROVIDED.
MARK HOLE LOCATIONS AND MOUNT
SUPPORT BRACKET (ITEM 6 - 2640700) TO RANGE
BACK WITH (2)#10-16 TEKS SELF-DRILL/TAP
SCREWS (ITEM 11 - F67 - NOT SHOWN) PROVIDED.
ITEM
4.5" W.C 3/4"NPT, Regulator Natural Gas, supplied with Range
3/4" ISO 7-1, Regulator Natural Gas, supplied with Range
1
10" W.C 3/4"NPT, Regulator Propane Gas, supplied with Range
3/4" ISO 7-1, Regulator Propane Gas, supplied with Range
2 Nipple, 3/4" NPT x 1/2" (one supplied with range)
3 Elbow, 90deg, 3/4" NPT (one supplied with range)
4 Union, 3/4" NPT
5 3/4"CC x 3/4" NPT Straight Fitting
6 Bracket, Pipe Support
7 Clamp, Pipe Support Bracket
8 Reducing Elbow, 90deg, 3/4" NPT x 1/2" NPT
9 Nipple, 3/4" NPT x 6.5"
10 Reducing Tee, 3/4" NPT x 3/4" NPT x 1"
11 Screw, #10-16 x 1/2" Hex, Washer Head, Teks Self-Drill/Tap (not shown)
12 Screw, #10-24 x 1/2" Pan Head, Self-Tap, Type F (not shown)
6" W.C 3/4" NPT, Regulator Natural Gas, supplied with Salamander/Cheesemelter
13
10" W.C 3/4" NPT, Regulator Propane Gas, supplied with Salamander/Cheesemelter
14 Nipple, 3/4" NPT x 3.5"
15 Tubing 3/4"
Page 8
(Models GIR36, GIR48 & GIR60)
REGULATOR - 6.0"w.c. NATURAL GAS
OR 10.0"w.c. PROPANE GAS
(SUPPLIED WITH SALAMANDER/
CHEESEMELTER)
13
DESCRIPTION
CUT TUBING (ITEM 15 - 4531608) TO SIZE AS REQUIRED
TO SUIT SALAMANDER/CHEESEMELTER TOP OR REAR
MANIFOLD INLET CONNECTION
15
3 SUPPLIED WITH RANGE
5
2
SUPPLIED WITH RANGE
REGULATOR - 4.5" w.c. NATURAL GAS
OR 10.0" w.c. PROPANE GAS
(SUPPLIED WITH RANGE)
1
2
9
4
2
10
14
3
TO INLET OF RANGE
MANIFOLD
7
1" NPT GAS SUPPLY
CONNECTION
QUANTITY 36"
1
1
1
1
3
2
2
2
1
1
1
1
1
2
2
1
1
1
1
Part # 4523916 Rev 2 (05/05/14)
6