JVC GV-LS2 Manual De Usuario página 10

4 Enter the user name and password
of the administrator.
Initial setting: USERNAME "root",
PASSWORD "password".
If login is successful, the setup screen
appears.
Changing the settings
Select "NETWORK", "CAMERA/PAN
TILTER", or "MANAGE" in the left window
of the screen to change the settings.
Click "+" on the left of each item to show
the sub categories.
● "NETWORK"
• "WIRED NETWORK"
For establishing a wired connection.
• "WIRELESS NETWORK"
For connecting wirelessly.
• "MONITORING SETTINGS"
For connecting via a network.
• "STREAM SETTINGS"
Format for transmitting/recording.
● "CAMERA/PAN TILTER"
• "CAMERA SETTINGS"
Camera settings such as zoom.
• "PAN TILTER SETTINGS"
Pantilter settings such as angle.
● "MANAGE"
• "COMMON SETTINGS"
Change the password of the
administrator, set the clock, etc.
• "MEDIA MANAGEMENT"
Format the SD card.
• "TURN OFF CAMERA"
Turn off the power of the camera.
* The power cannot be turned on via
the browser.
For details, refer to the "Detailed User
Guide".
10
For more details, refer to the Detailed User Guide at http://manual3.jvckenwood.com/
Connecting the AC Adapter to
the pantilter
For more details about attaching the
pantilter, refer to page 11.
Connect the supplied AC adapter to the
DC connector of the pantilter.
• Unlock the pantilter before
connecting the AC adapter. (page 8)
• Remove all tape from the pantilter.
AC adapter
• After connecting the AC adapter, the
power turns on and the pantilter moves
automatically for position adjustment.
The pantilter moves everytime the unit
is turned on.
• The power lamp blinks when the
position adjustment fails. Turn off
the unit and turn it on again for
readjustment.
• When the pantilter is not used, connect
the AC adapter to the camera itself.
MIC
RESET
DC
DIRECT WLAN LAN(OFF)
AV
ETHERENT
PLUG IN
MIC AV EXTEND DC
POWER
Conversion cable