Care Instructions - American Standard DELANCEY 4279.300 Instrucciones De Instalación

5
TEST INSTALLED FAUCET
• Move HANDLE (1) into "off" position.
• Turn on water supplies.
• Check connection for leaks.
(See Section 4)
• With HANDLE (1) in "off" position,
unthread SPRAY (3) from HOSE (2).
• Operate handle back to front, in
COLD and HOT positions, to flush
water lines thoroughly.
• Replace SPRAY (3) onto HOSE (2).
6
SERVICE
If faucet drips, operate HANDLE several times
from "off" to "on." Do not apply excessive force.
Clogged CARTRIDGE outlets or inlets may
cause reduced flow.
To clean, first turn off water supply then:
• Loosen HANDLE SCREW (1) and remove
HANDLE (2).
• Unthread ESCUTCHEON CAP (3) and
ADAPTER (8). Unthread three
MOUNTING SCREWS (4).
• Lift CARTRIDGE (5) off MANIFOLD (6)
and remove CARTRIDGE SEALS (7).
• Clean MANIFOLD (6), CARTRIDGE (5)
ports and SEALS (7).
• Place SEALS (7) into CARTRIDGE
PORTS (5a).
• Place CARTRIDGE (5) onto
MANIFOLD (6) tighten ADAPTER (8)
and tighten MOUNTING SCREWS (5)
alternately.
• Replace ESCUTCHEON CAP (4),
HANDLE (2), tighten HANDLE
SCREW (1).
7

CARE INSTRUCTIONS:

DO: CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
2
3
COLD
REMOVE
- 3 -
SPRAY OPERATION
• With FAUCET on press TOGGLE
BUTTON (4) on SPRAY (3) to
switch from stream to spray.
• Press and hold PAUSE BUTTON (5)
to temporarily stop flow from
SPRAY (3). Release PAUSE
BUTTON (5) to resume flow
fromSPRAY (3).
OFF
HOT
ON
1
3
5a
7
5
6
5
STREAM
(AERATOR)
4
SPRAY
2
8
4
3 1
M965796 Rev. 1.0 (11/18)