Installation Instructions - GE Profile PV970 Serie Manual Del Propietario E Instrucciones De Instalación

Installation
Instructions
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT
•
— Save these instructions
for local inspector's use.
IMPORTANT
•
— Observe all governing
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these instructions
for future reference.
• Skill level – Installation of this vent hood requires
basic mechanical and electrical skills.
• Completion time –
Approximately
• Proper installation is the responsibility
of the installer.
• Product failure due to improper installation
is not covered under the Warranty.
CAUTION
— Due to the weight
and size of these vent hoods and to reduce
the risk of personal injury or damage
to the product, TWO PEOPLE ARE REQUIRED
FOR PROPER INSTALLATION.
FOR YOUR SAFETY:
WARNING
— Before beginning the
installation, switch power off at service panel and
lock the service disconnecting means to prevent
power from being switched on accidentally. When
the service disconnecting means cannot be locked,
securely fasten a prominent warning device, such
as a tag, to the service panel.
Chimney Vent Hoods
19 - 3/4"
1 to 3 hours
19 - 3/4"
7
PRODUCT DIMENSIONS
10-7/8"
*Height
to
13-1/8"
Ceiling
29-7/8"
30" Models Require a 30" Wide Opening
10-7/8"
*Height
to
13-1/8"
Ceiling
35-7/8"
36" Models Require a 36" Wide Opening
* For supplied duct cover ceiling heights for vented installation
and recirculating installation, refer to the table on page 13.
17-1/2"
2-1/4"
2-1/2"
2-3/8"
3-1/8"
Allow 1" overlap
of duct.