USER SETUPS
The balance could be set up to meet individual requirement.
1. Press the
2. Press the
3. Anytime to exit the setup program, press the
then press the
PRINT SETUPS
There are three print types:
STAbLE Print: print a stable reading when it is attained.
INSTANT Print: print immediately after press the
INTERvAL Print: print at predeterminated time intervals.
Note: The print function is separate from the line feed setup, i.e set the print
function first then set the number of line feeds.
To set the print type, use the following procedure:
1. Press the
2. Press the
stable print as the default.
3. Press the
4. Press the
display will show "SEC".
20
key while pressing the
key to choose the ítem to be set up, then press
to confirm.
key while pressing the
key, the display will show "STAbLE", which indicates
key to choose the print type and confirm pressing the
key until the display reads "InTEr", press the
key to enter to setup program.
key, it reads "ESC",
key, the display will show "PrInt".
to confirm.
key.
.
key, the