ENGLISH
SAFETy INFORMATION
To avoid unnecessary demage to the balance, please pay attention to the
following tips:
•
Please do not use this balance in dangerous área.
•
Only the trained technicians could operate this balance.
•
Please turn off the power of the balance before connect it or disconnect
it with other facilities.
•
If the environment requires a higher safety standard, please follow the
relevant installation instructions.
•
Excessive electromagnetic interference will make the displayed value
in this balance change. Once the interference is dismissed, the balance
could operate in normal way.
•
Please avoid any liquid on the surface of the balance. A piece of lightly
damp cloth is allowed to wipe the balance.
INSTALLATION
•
Please make sure the local voltage is in line with the rated voltage on
the name board.
•
Please pay special attention when use RS-232 as the pins location
might be incompatible with our facilities. Please check the pins
locations before the connection and turn off the connection of different
configuration.
8