Weighing Units; Enabling Weighing Units - Gram FH Serie Manual De Utilización

3. Press the
"100.00".
4. Remove the container with standard object. Put another same
container on the weighing pan, wait for the stable display, it reads
"0.000" or "0.00".
5. Add the goal object in the container, wait for tyhe stable display, the
value displayed is the percentage the weight of the goal object varies
from the standard weight.
6. Press the
7. If necessary, the weight of the goal object could be printed out.

WEIgHINg UNITS

1. Press the key
weighing mode (normal weighing, counting or percentage mode).

Enabling weighing units

The units function can be programmed to turn certain weighing units on or off.
To enable or disable certain units of measure, perform the following procedure.
1. Press the
2. Press the
3. Press the
Press the
key, then the display reads "g no", press the
4. Follow the steps above to enable or disable Oz, Ct or dwt as the unit of measure.
key. Wait for the stable display, it reads "100.000" or
key to return to normal weighing mode.
to select the desired unit weight (g, oz, dwt) or
key while pressing
key repeatedly until it reads "unIT".
key, the display reads "g yes" which means g available for use.
key to confirm. To disable "g" as the unit, press the
key, the balance reads "PrInT".
key to confirm.
17