Inserting The Battery Pack - Sony Cyber-shot DSC-T2 Manual De Instrucciones

Camara fotografia digital
Ocultar thumbs Ver también para Cyber-shot DSC-T2:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2 Inserting the battery pack

Battery/"Memory Stick Duo"
cover
Open
1
Open the battery/"Memory Stick Duo" cover.
2
Insert the battery pack.
3
Close the battery/"Memory Stick Duo" cover.
[
To check the remaining battery charge
Press POWER button to turn on and check the remaining battery charge on the LCD screen.
Remaining
charge
indicator
Status
• If the NP-FD1 battery pack (not supplied) is used, the minute display (
the battery remaining indicator.
• It takes about one minute until the correct remaining charge indicator appears.
• The remaining charge indicator may not be correct depending on conditions of use and circumstances.
• The Clock Set screen appears when you turn on the camera for the first time (page 14).
12
Close
Sufficient
Battery
power
almost fully
remaining
charged
Align the v mark of the battery slot with the v
mark on the side of the battery pack. Press and
hold the battery eject lever and insert the
battery pack.
Battery half
Battery low,
full
recording/
playback
will stop
soon.
Battery eject
lever
Change the battery
with fully charged
one, or charge the
battery. (The warning
indicator flashes.)
60 Min) is also shown after

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido