Turning The Camera On/Setting The Clock - Sony Cyber-shot DSC-T2 Manual De Instrucciones

3 Turning the camera on/setting the clock

1
Press the POWER button or slide the lens cover downward.
2
Set the clock by touching the button on the touch panel.
1
Touch the desired date display format, then touch
2
Touch each item, then set its numeric value by touching v/V.
3
Touch [
OK
On the touch panel buttons
Perform settings on this camera by lightly touching the
buttons or icons on the screen with your finger.
• When the item you want to set is not on the screen, touch v/V to
change the page.
• You can return to the previous screen by touching [BACK].
• Touching [?] displays the guide about the touched item. To hide
this guide, touch [?] again.
• When the top right of the screen is touched while shooting, the
icons will momentarily disappear. Taking your finger off the
screen will make the icons reappear.
When the touch panel buttons do not react well, perform the calibration.
1 Touch [HOME] and select [Calibration] from [Main Settings] of
2 Using the paint pen, touch the center of the × mark displayed on the screen.
14
].
POWER button
Touch panel
.
Lens
Lens cover
(Settings).