Assembly; Unpack The Pressure Washer; Attach Handle - Echo PW-3100 Manual Del Usaurio

ASSEMBLY

Your pressure washer requires some assembly and is ready for use after
it has been properly serviced with the recommended oil and fuel. We
recommend SAE 10W30 Oil for engines.
If you have any problems with the assembly of your pressure washer, please
call our support line. If calling for assistance, please have the model and serial
number from the data tag available.

Unpack the Pressure Washer

1. Remove the parts bag, accessories, and inserts included with pressure
washer.
2. Open box completely by cutting each corner from top to bottom.
3. Ensure all contents are present prior to assembly.

Attach Handle

1. Place handle (A) onto handle supports (B) connected to main unit.
Make sure holes (C) in handle align with holes on handle supports.
NOTE: These diagrams are intended for general reference. As a result, they
may not fully reflect the appearance of your product.
2. Insert carriage bolts through holes from outside of unit and attach a
plastic knob from inside of unit. Tighten by hand.
3. Insert multi-colored quick connect spray tips and other supplied
accessories in spaces provided on handle.
A
C
B
13