The following diagrams are intended for general reference.
Your pressure washer may differ from the models shown in the following
pages. For specific model information, please visit contact us.
1.
2.
3.
5.
6.
7.
1.
Spray Gun - Controls the application of water onto cleaning surface with trigger
device. Includes trigger lock. Allows you to switch between various spray tips.
2.
High Pressure Hose - Designed to withstand the pressure created by the pump.
3.
Air Filter - Protects the engine by filtering dust and debris out of intake air.
4.
Fuel Tank - Fill tank with regular, unleaded fuel. Always leave room for fuel
expansion.
5.
(Top) Choke Rod - Prepares a cold engine for starting.
(Bottom) Throttle Lever - Sets engine in starting mode for recoil starter.
6.
Recoil Starter - Used for starting the engine manually.
7.
Soap Tank - (Not included on all models) Fill with pressure washer detergent only.
8.
Pump - Develops high pressure. Connect the garden hose to the inlet of the water
pump, and connect the high-pressure hose to the outlet. Connections vary by
model.
9.
Muffler/Exhaust - Reduces noise of the engine and expels heat.
10. Detergent Siphoning Hose - Used to draw detergent into the low pressure stream.
11. Spray Tips - Detergent, 0°, 15°, and 40°: for various cleaning applications.
14
PRESSURE WASHER COMPONENTS
11.
9.
10.
4.
8.