SHUTTING DOWN YOUR WASHER
• DO NOT touch hot parts and avoid hot exhaust gases.
• Allow equipment to cool for at least 15 minutes before touching.
• Keep at least 5 feet (1.5 m) of clearance on all sides of pressure washer
(including overhead) while in operation.
How to Shut Your Pressure Washer Down
1. Release spray gun trigger and let engine idle down.
2. Turn the engine switch to the OFF position.
3. ALWAYS point spray gun in a safe direction, squeeze spray gun trigger to
release retained high water pressure.
IMPORTANT: Spray gun traps high water pressure, even when engine
is stopped and water is disconnected. Couplers will not release if under
pressure.
WARNING
Contact with muffler area can result in serious burns.
Exhaust heat/gases can ignite combustibles, structures or
damage fuel tank causing a fire.
21