0
o
RED
How to Use Spray Tips
The quick–connect on the nozzle extension allows you to switch between four different
quick connect spray tips. Spray tips can be changed while the pressure washer is
running once the spray gun trigger safety lock is engaged. The spray tips vary the spray
pattern as shown above.
Follow these instructions to change spray tips:
1. Pull back collar on quick–connect coupler and pull the current spray tip off.
Store the spray tips in the holder provided on the handle. Storing nozzles in
the designated holder will help prevent any debris from clogging the tip.
2. Select the desired spray tip:
• For a gentle rinse, select the white 40° spray tip.
• For high pressure cleaning, select the yellow 15° spray tip.
• To scour the surface, select the red 0° spray tip.
• To apply detergent, select the black spray tip.
3. Pull back on collar, insert new spray tip and release collar. Tug on spray tip
to make sure it is securely in place.
Usage Tips
• For most effective cleaning, keep spray tip 8"(20.3cm) to 24"(61cm) away
from cleaning surface.
• If you get spray tip too close, especially using a high pressure spray tip (red
or yellow), you may damage the surface being cleaned. Do not use the
red spray tip on glass.
22
15
o
YELLOW
SPRAY TIPS
40
o
WHITE
soaper
BLACK