Starting Your Washer; How To Start Your Pressure Washer - Echo PW-3100 Manual Del Usaurio

STARTING YOUR WASHER

How to Start Your Pressure Washer

To start your pressure washer for the first time, follow these instructions
step-by-step. This starting information also applies if you have let the pressure
washer sit idle for at least a day.
1. Place pressure washer near an outside water source capable of supplying
water at a flow rate at least 1 GPM greater than the rated flow of your
pressure washer. It should also be no less than 20 PSI at pressure washer
end of garden hose. DO NOT siphon standing water.
2. Make sure unit is in a level position.
3. Connect garden hose to water inlet on pressure washer pump.
DO NOT run the pump without the water supply connected and turned on.
• Damage to equipment resulting from failure to follow this instruction
will void warranty.
4. Attach wand extension to spray gun. Tighten by hand.
5. Choose desired spray tip, pull back nozzle extension collar, insert spray
tip and release collar. Tug on spray tip to make sure it is securely in place.
See Spray Tips.
NOTICE
17